Best Drivers for a Slice
I am not suggesting it is easy to master a driver, but it is essential to have the best one to suit your game. You can adapt your game to the course you are playing. However, if you slice your drives regularly, as a right hander, you will find it difficult to play holes that have ‘’tree trouble’’ on the left. Bringing your ball back from the left to get into the middle of the fairway becomes a real challenge. One of the things you should consider is investing in one of the best drivers for a slice so that you can aim down the middle instead. We have reviewed the best on the market below.
You’ve decided you want to take a few lessons and get better at this maddening game called golf. There’s only one problem, you don’t have any clubs. In order to help guide you on making the best decision for your game, we’ve compiled our list of best irons for beginners.
Our #2 Rated
Our #3 Rated
Callaway Rogue Driver
Best Womens Driver for Slice
4.6 out of 5
Our #5 Rated
Ping G400 SFT
Best Mid-Range Price
4.7 out of 5
Understand the Problem to Help your Purchasing Decision
I understood very early in my golf ‘’career’’ that it was essential to keep the golf ball in play. Good game management is the way to reduce your handicap but that is difficult if you fail to hit the fairway off the tee on a regular basis. You will be struggling to make par if your second shot is not on the fairway because you are regularly slicing the ball off the tee.
What is a slice?
First of all, it has nothing to do with the power of the shot. It will still travel as far as a straight shot, but its path will be curved and as a result, not only is distance lost, the ball may well be in trouble. The problem is that the club face has not been square to the ball on impact and so it imparts side spin on the ball. I have not cured the problem completely but that is the nature of being a handicap golfer. More consistency has been my aim, and I have achieved that. Don’t imagine slicing the ball will disappear the more you play golf. It is a problem that golfers face throughout the time they play the game. There are common ‘’faults’’ leading to a slice.
If you bring the driver inside on your backswing, you will have to compensate as you bring the club down through the ball, creating an out to in swing which results in the clubface being open as a result.
There are other reasons why you might slice the ball. One is alignment. You may think that you are properly aligned with your shoulders parallel to the intended path of the ball at address. Ask you playing companions to take a look. You might be wrong and when they correct you, the position may feel uncomfortable. The solution is often to pull your right elbow in towards your body which squares your shoulders. That is the position that you have to get used to. Don’t worry, it will become second nature.
A third reason why you may regularly slice the ball is your grip. Once again, you should take advice and when you are shown the correct grip you may also find it unnatural. Persevere and it will once again become second nature.
Why Is a Slice More Common with a Driver than an Iron?
The problem with hitting a driver is that it is your longest club with minimal loft. There are more things that can go wrong when you swing your driver as opposed to a medium iron. In the downswing with your driver, the clubhead is effectively ‘’lagging behind’’ and if that is still the case on impact, the club face is likely to be open, hence the slice.
The shorter shaft of all irons and the increased loft of the club face both make it easier for you to hit the ball in the direction intended, even if you have yet to solve your problem off the tee with a driver.
Few golfers hit a straight ball every time. Indeed, many top professionals seek to work the ball, either left to right or right to left. At the highest level, pros need to be able to do both at different times in their rounds. Instead of slice, think ‘’fade’’ which is a controlled shot moving marginally left to right. Instead of hook, think ‘’draw’’ where the flight is a controlled right to left.
Handicap golfers like ourselves have not got the same level of skill. You will already have a better idea of a slice and the solutions by reading thus far. A hook is the total reverse whereby the club face has closed at impact, causing the ball to curve, sometimes very violently right to left.
Both problems take the ball off course, and potentially into trouble. The problem, if regular, needs resolution.
How have Golf Club Manufacturers Tried to Help Us All Out?
The Industry’s answer to help golfers counter their slice has been one of design.
In today’s market, there are a number of ‘’offset’’ drivers with the main feature being that the shaft and the club face are not directly aligned. The face is set back slightly from the neck of the club. The result is a fraction longer for a player to square that face during their swing. That should reduce the tendency to slice the golf ball.
A word of caution! If you have a good swing, then playing with an offset driver may result in your club face being slightly closed on impact which can result in a hook which will take the ball off target just on the left rather than the right.
The other solution that manufacturers have found is to change the weight balance of the club head. By putting more weight in the heel, the rear of the club rotates slower, thereby keeping the club face more closed on impact, and hence less likely to produce a slice.
When you are looking for the best drivers for a slice, a combination of these two things are likely to be features of the drivers to consider.
Reviewing the Best Alternatives
The logic behind this lightweight offset driver is that its weight will help to increase your swing speed and the offset design will help you to counter your tendency to slice. In addition, the hosel design helps you to get the ball into a good flight path. Cobra believes that a moderate swing speed is one of the factors likely to create a slice. The 50-gram Superlight shaft is at least 10 grams lighter than most of the competition, and as much as 40 grams, so you will find it easy to swing while having enough weight in the club head to achieve the distance you are seeking.
It is designed to help to golfers who have a problem slicing the ball off the tee. The club will immediately give you confidence as you address the ball because the Cobra F Max Offset makes aligning the club face with the ball is easier too.
PXG from Pinemeadow is a relatively new brand on the market and it has been successful in penetrating a competitive sector. It entered the market in 2014 with the promise of using the best materials and latest technology to produce golf clubs. It is heel weighted with a deep center of gravity to inhibit too much spin with the offset design further combating your slice. The PXG comes in a range of lofts up to 14 degrees for those wanting distance but needing a sympathetic head.
The carbon fiber crown construction promotes speed and distance while minimizing energy loss. The weighting within this driver can be adjusted to suit your swing while the hosel angle can be adjusted up or down to achieve the trajectory you are seeking. The PXG is easy to align when you address the ball, with the optimum sweet spot identified on the head as you look down.
The PXG aims at golfers who do not put price at the top of their list of priorities.
Best Womens Driver for Slice
The Callaway Rogue Series is the next stage in the Company’s range, superseding the Epic. Ironically, the only slight concern with Callaway is that is seems to continually introduce a new club, almost rendering the previous range obsolete. Having said that, the Rogue is certainly user-friendly, giving its owners confidence off the tee. It is forgiving without compromising on distance. It is not cheap but comes with a range of shafts and lofts. It has a draw bias for those prone to a slice thanks to the heel weighting with the center of gravity (CG) towards the heel as well. The result is a reduction in side spin; a slice.
The Rogue is also Callaway’s answer for golfers’ looking to get elevation and good flight path off the tee. Its standard shaft is lightweight, just 40 grams, while the large carbon crown surface area and specially designed head following research on airflow with Boeing both help create a product that will delight Callaway fans.
Ping 400 SFT
Best Mid-Range Price
‘’SFT’’ is Ping’s way to identify Straight Flight which is the logic behind its G400. The Club head at 445cc and lightweight feel are designed to reduce drag from a quicker swing. Ping uses tungsten heel-weights for a deep center of gravity (CG) to help counteract your slice. You can buy with either a 10 degree or 12-degree loft.
The G400 can be adjusted +/- a degree to suit you pre-round but there is no CG adjustability for changing potential ball flight.
If your priority is to simply enjoy your golf and you are not considering playing in any competitions, the Non-Conforming Offset Monster may be the answer for you. Its large sweet spot and offset design help to counteract your tendency to slice the ball; what enjoyment is there anyway forever spending time in the rough after slicing off target.
The Monster is customized to your requirements with a 515cc head if you wish, a range of lofts and shafts with a design helping you achieve a good ball flight off the tee.
Golf manufacturers understand the major problems that average golfers like you and me having in tackling the game. Slicing the ball off the tee is certainly one of them because a decent drive is essential in order to play well. Their answer to this seems to involve around heel-weighting and offset clubs. We have reviewed some of the best alternatives for you and believe the Cobra F Max Offset is the one to try first.